ALL BOARD are tested and in working condition. Please be sure that the Part Number and picture of your board look EXACTLY as the one listed. There are possibly several different boards for each model TV. Powered by SixBit’s eCommerce Solution.
A0006Z00J VIZIO M65Q6-J09 MAIN BOARD 6M03A0006Z00J. It’s been pulled out from brand new TV with a cracked screen. First make sure all these numbers are an exact match with your original board otherwise you will get an upside down picture or no picture at all. Tip to fix your TV. We will send you a board in 100% working condition. Feel free to get back to us with any question about your repair. Upon inspection, S/N or special markings verification. If you do not make within this time frame, the item will be. The easiest way is to use the “Ask a Question” link near the bottom of the description page of this item. We value our customers and we appreciate doing business with you. We respond with feedback when feedback has been left for us. We care about our customer’s concerns.
When you plug the tv in, front led lights up and slowy fade away like normal, but when you hit power, the front led lights up but backlight doesn’t turn on. Also no picture even if you shine a flashlight on the dark screen, or no sound. When you plug tv in it appears as if it’s going to turn on and then after a few seconds tv light fades out and tv must be unplugged and plug back in, inorder for buttons to funtion again. Tv sometimes shuts down after a few seconds when power button is pressed and blinks 15- 16 times. We normally test all boards before and after each repair. We usually can fix 99% of these Boards. If we cannot fix your board that hasn’t had any attempted repair, no charge if we keep the board for parts. Please bubble wrap your board and put it in a. Please get the board to us before 10 days. Message us if you have any questions.
Please, refer to the picture(s) that this is the one you need. The part is a new. Our return rate is low, and we work hard to resolve any issues. We may have other parts available for sale for this model that are not listed in our store. If you cannot find what you are looking for, please ask. We need the model number AND part number/description/picture of the part. A picture will significantly help in locating the item. We check our messages often and respond to all inquiries. We value you as a customer and would like to thank you for your business.
Main Board XHCB0QK036030X 715G9182-M01-B00-005T for Vizio D65-F1 LTMUWSLU, LTMWWS. Part Type: Main Board. Part Usage: TV LED/LCD. MFR Part Number: XHCB0QK036030X. Board Number(s): 715G9182-M01-B00-005T. Notes Comments & Additional Information: We recommends ordering by part number whenever possible. Often times there are TV models that use more than one set of parts and/or panels. Important Message: Part number can be found on a sticker. TV Part Types: Main Board.
SERVICE DESCRIPTION – PLEASE READ IN FULL! REPAIR SERVICE means that you need to send us your malfunctioning board that we will attempt to service, test and return to you. HOW DOES IT WORK This is a flat rate testing and repair service, meaning we will attempt to repair any problem with the board within that price as long as the board we receive meets our requirements (see separate section below). Depending on what we find out and what we do you pay the listed price or less (details explained further below). Following the instructions you package and send or otherwise deliver the board to us. If the board arrives in working order you will be contacted for details. If the board is bad then we attempt to repair it. If we succeed we usually send the board back without communication. If we fail to repair the board we contact you with details. If you have any questions please ask before initiating the service! While there can clearly be a large number of failures and failure symptoms that probably can’t all be listed, here are the most common ones we’ve seen this board cause that we’ve seen. Totally dead TV ; this can be caused by a bad power supply as well, but at least for the XVT423SV model we’ve seen the main board being bad more often than the power supply board. The front LED indicator blinking endlessly, but the TV never starting up. The front LED blinking for a while and then stopping just as it should, but then the TV hangs without doing anything. TV starting, but not recognizing certain inputs, usually HDMIs being the top issue. REQUIREMENTS FOR THE BOARD SENT FOR SERVICE. The board(s) we receive must be physically intact and must have not been tampered with or serviced before. The advertised flat rate for repair service is only valid when the above conditions are met. Exceptions are possible and often applied for minor repair attempts, but we reserve the sole right to judge if and when we would consider a repair minor. It is also possible, depending on the condition of the board, to eliminate the second possibility and just flat our reject having to service the board. Subject to situation and availability we may also recommend replacement of the board, again at the higher than advertised price for repair. 4 RIGHT TO WITHDRAW – we reserve the right to refuse to sell for whatever reason.
Please, refer to the picture(s) that this is the one you need. The part is a new. Our return rate is low, and we work hard to resolve any issues. We may have other parts available for sale for this model that are not listed in our store. If you cannot find what you are looking for, please ask. We need the model number AND part number/description/picture of the part. A picture will significantly help in locating the item. We check our messages often and respond to all inquiries. We value you as a customer and would like to thank you for your business.
Vizio P702UI-B3 Main Board… This board newly recertified, after removal (all CAPs and components replaced and tested by certified technician). Or the boards will NOT work in your tv. Please be sure to check the numbers on the boards before purchasing to be sure it is what you need. The pictures are of the actual items you wi. Ll be receiving, please check out ALL photos of the labels. Our pledge is that the boards were tested before removal and they are in 100% working condition. The boards were pulled from a tv that had a bad screen. ALL boards/LEDs (on our entire page) were tested by a qualified technician before removal, and inspected for ALL functions. Please have your tv diagnosed and save yourself the issues and get the part to repair it without “trial and error”. We will package the board with extreme care to be sure it arrives in the same condition as stated. We would not sell ANY board without being sure it was fully working. Our feedback records speak for themselves. Please feel free to message us with any questions you may have. NOTE, Sorry, no cables, wires or screws are included with the boards/LEDs. All stands/feet/legs/pedestals come with OEM screws (unless clearly marked otherwise). Thanks for stopping by, Stay Safe!
